Skip to content
adahandmade homeadahandmade

Material & room journal

How to choose among carved pile, loop texture and sculptural surfaces — and what not to mix

Before you lock a commission brief, choose among the three surface families published on this site — carved and cut pile, loop and high-low texture, and shaped and sculptural — by what the piece must do in the room, not by a picture alone. Do not mix finishes or infer a construction from artwork; do not treat the three family pages as a partition of the 41 designs.

Lobelia: Pale neutral rectangular rug with narrow vertical carved channels across the surface.
Lobelia · A carved surface in the collection. Construction and finish are confirmed in the specification, not inferred from the image.

A surface-family table to use before the brief is locked

Before you lock a commission brief, choose among the three surface families published on this site — carved and cut pile, loop and high-low texture, and shaped and sculptural — by what the piece must do in the room, not by a picture alone. Do not mix finishes or infer a construction from artwork; do not treat the three family pages as a partition of the 41 designs.

The commission brief is the page that locks fibre, colour, surface, shape and edge before sampling and production. This page sits one step earlier: it helps you choose a surface family, and it states what should not be mixed or assumed, so the brief has a clear starting point.

Surface-family decision table for a handmade or hand-finished commission on adahandmade.com. Use it before the brief is locked.
FamilyWhat it is on this siteWhen it fitsWhat not to mix or assume, and what must be confirmed
Carved and cut pileOn this site, the Carved & cut pile family is “a complete design made tactile through carving and cut pile.” Relief carving produces recessed lines against a raised ground; cut pile is recorded as a finish on individual designs.When the brief wants the design to be read through carving or a cut-pile surface, and a sample can show the ridge and the ground together under the project lighting, including raking light and the main sightline.Do not infer the construction from artwork or from a photograph. Do not assume that a similar colour on a loop design has the same carved finish. Construction, fibre, the carved or cut finish, backing and edge must be written into the specification and confirmed at sampling.
Loop and high-low textureThe Loop & high-low texture family is described here as “surfaces defined by loop work and changes in pile level.” A high-low cut-loop finish steps between loop and cut pile; those transitions belong to the individual design record, not to the family name alone.When the brief wants loop work, a change in pile level, or a high-low surface, and the sample can show those transitions in the actual room light, in daylight and in evening light.Do not mix an assumed cut-only or carved finish onto a loop design because the colour looks similar. Pile transitions, fibre, backing and edge must be confirmed in writing / at sampling. Catalogue reference sizes are starting figures, not stock.
Shaped and sculpturalThe Shaped & sculptural family is described here as “expressive outlines that can define a seating group or a quieter corner.” The site already lists rectangular, shaped, octagonal, round and runner outlines among the designs.When the room needs a particular silhouette — a round, a runner, an irregular or sculptural outline — rather than a standard rectangle, and that outline will be agreed against the furniture and the circulation of that room.Do not use a generic living-room furniture size chart to fix the outline, and do not assume that a shaped outline settles the surface or the construction. The outline, finished dimensions, surface family, fibre and construction must all be confirmed in the commission brief.

Forty-one designs, three families — not a partition

The collection presents 41 distinct handcrafted designs, each with its own fibre, technique and catalogue reference size. The site also groups designs into the three surface families above, and the 41-design library is the place to read those records together. The family pages are a way into the library. They are not mutually exclusive slices of the 41, and the item counts shown on those pages should not be added together as if they were.

On this site, handmade, handcrafted and hand-finished describe individual rugs and custom commissions whose fibre, technique, surface, dimensions, backing and edge are agreed design by design, through artwork and a physical sample. They do not describe a single house specification applied across the collection, and they are not a claim that every commission is hand-knotted. The published workshop is a hand-tufting workshop in Xiqiao, Nanhai, Foshan. Construction is a field in the specification; it is not something to infer from a drawing or a photograph.

What not to mix, and what a sample still has to show

Do not mix two surface families on one piece unless the written specification and the approved sample say so. Do not carry a fibre, a carved finish or a high-low transition from one design to another only because the colours look similar. Do not treat a screen image as approval for a carved or sculptural surface: a sample should carry the ridge and the ground together, and it should be read in the project’s daylight and evening light, including raking light and the main sightline.

This site does not publish a knot count, a generic machine-made identification method, or a standard production time. The back and the edge of a finished piece are read against the agreed specification, as the note on reading a handcrafted rug already describes. Timing, availability and delivery are confirmed for the individual order.

When to leave this page for another guide

If the question is how to size a movable rug around a sofa and table, use the furniture-group size note on adarug.com. If the question is a wall-to-wall or mill specification for a hotel or workplace, use the hotel and workplace specification brief on adacarpet.com. This page does not publish a living-room furniture size table, and it does not publish a hotel specification checklist.

How to take the next step

Once a surface family is in view, how to read the back and edge of a hand-finished rug explains what to look at on the back and the edge, and why construction must still be written into the specification. Once a surface family is chosen, lock the remaining fields in the commission brief and review a physical sample before production. Email adafloor@163.com or call +86 158 1876 6066. Showrooms are in Shenzhen and Shanghai; visits are by appointment. The workshop is the hand-tufting workshop in Xiqiao, Nanhai, Foshan. Catalogue reference sizes remain starting figures, not stock.

Bring the plan, palette and preferred surface family to the conversation.

Discuss a rug or carpet with ADA ↗

Take the next selection step

Read this surface-family table alongside the individual design record, the commission brief and a physical sample before production is approved.